fbpx
Welcome, Guest
Username: Password: Remember me
Visual Objects

Please use this forum to post questions about Visual Objects and Vulcan.NET
  • Page:
  • 1

TOPIC:

Trouble with VO 2.8 Repository - crash when starting... 24 Nov 2020 20:43 #16755

  • omoser's Avatar

  • omoser

  • Topic Author


  • Posts: 15
  • Hi All, working on preparing the transition to X#, and suddenly run into troubles..
    All worked fine, but seems that somehow my repo crashed, and i cannot even reindex it.

    IDE-ERR.LOG shows following error:

    Date/Time: 2020-11-24 20:20:06
    Version : Visual Objects 2.8 SP4 build 2838
    Error : An unhandled exception (0xC0000005) occurred inside module:
    : C:\cavo28sp4\Bin\Cavosupp.dll at 0x74D3C1B6
    Registers: EAX = 0x05DB000C EBX = 0x09DB0000 ECX = 0x00E9C30C EDX = 0x05DB0000
    : ESI = 0x05DB0000 EDI = 0x0000002B ESP = 0x004FE1F4 EBP = 0x09DB3020

    I still have the hope that there is a trick with the index files, because all files have the change date of 20.11.2020, what was the working version. The file APPTAB.VO and _CATALOG.VO have the date of the 24.11.2020, there i made a small change, but it seems that this could not be saved correctly, and since then i could not open this repo. i included a screenshot to demonstrate this.
    Another test Repo could be opened without any problems.

    Thanks in advance for any tipps or hints what to do / try out to fix this.

    Best regards,
    Oliver

    Please Log in or Create an account to join the conversation.

    Trouble with VO 2.8 Repository - crash when starting... 25 Nov 2020 05:54 #16756

  • wriedmann's Avatar

  • wriedmann


  • Posts: 2482
  • Hi Oliver,
    maybe this thread may help?
    www.xsharp.info/forum/private-vo-vn/2207...0-reindex-error-gone
    (if you have access to the private area - otherwise with permission from Robert we may copy his instructions)
    Wolfgang
    Wolfgang Riedmann
    Meran, South Tyrol, Italy

    www.riedmann.it - docs.xsharp.it

    Please Log in or Create an account to join the conversation.

    Trouble with VO 2.8 Repository - crash when starting... 25 Nov 2020 20:56 #16761

  • robert's Avatar

  • robert


  • Posts: 2023
  • Oliver,
    Try this:

    Anyway you might try this:
    - BACKUP your repo. Save this for later, you might need it.
    - Look for a repo that still works (for example the Data Folder under your VO installation). I call this source. Your broken repo is the target
    - copy repname.ind from the source to the target
    - copy reptype.ind from the source to the target
    - you will find one or more .voa files in the target folder
    - Make sure each of these files has a partner .idx file. When this file is missing, take an abritrary .idx file from the source and copy it and rename it. So Test.voa should also have a Test.idx
    - Try to open the project and when you can, DO NOT reindex, but export every application to an AEF first to save your source
    - After that try to reindex.

    If that does not work then please send me the backup and I will perform some magic over here.

    Robert
    XSharp Development Team
    The Netherlands

    Please Log in or Create an account to join the conversation.

    Trouble with VO 2.8 Repository - crash when starting... 03 Dec 2020 11:38 #16873

  • omoser's Avatar

  • omoser

  • Topic Author


  • Posts: 15
  • Hi Robert, it did not work, but i created a new repo,
    and imported the last AEF, and it works again...
    lost 1 day, but ok for now,,,
    thanks for your support!

    Please Log in or Create an account to join the conversation.

    • Page:
    • 1